• Product Description
  • Theory

    The Maxlipo Light delivers both 635nm and 940nm light via high-powered, German-made, surface mount microchip lamps that are imbedded in a soft and flexible pad. This pad can easily be applied to any part of the body. Because of the Maxlipo Light’s proprietary reflective coating, the light that would normally bounce off the skin is reflected back, resulting in a much higher retention of light energy than with other similar devices.

    No other system has this reflective coating. Maxlipo Light temperature is between 43-50 degree, actual skin contact temperature is 42-45 degree. The treatment is painless, no discomfort, and can be safely operated for clients and operators.

    Unlike ultrasound, radio frequency, laser light and freezing, the system do not cause cellular damage. Quite the opposite, non-invasive Maxlipo Light has been shown to promote a natural response within cells based on the wavelength of the light energy used and the type of cell it reaches. Dual wavelengths(635nm and 940nm) have been used in a wide range of therapies that promote some form of healing response.

    The design of the Maxlipo Light pads that allow for better light delivery and retention within the tissue has been clinically proven to provide a superior result with consistent treatment outcomes. No other pad-based device can make these claims.

    Application

    The Maxlipo Light is used as a non-invasive dermatological aesthetic treatment for the reduction of circumference of the hips, waist and thighs. 635nm and 940nm(invisible light) stimulate the lymph drainage and reduce the cellulite, and the 940nm light penetrates deeper into adipose tissue.

    It is also for the temporary relief of minor muscle and joint pain, arthritis, muscle spasms, relieving stiffness, promoting the relaxation of muscle tissue and to temporarily increase local blood circulation.

    Treatment:

    The customer will lie on a treatment bed and the pads are placed over the area to be treated. The system will be turned on and the patient will feel a slight warming sensation, but no pain or discomfort. Most customers can read or use their phone/portable device, while some will even take a short nap.

    The Results will vary from patient to patient, primarily due to the commitment by the patient to their goals. If a customer maintains a healthy lifestyle of a diet and exercise program that promotes weight control, their results can be long term.

    The Maxlipo Light can be used on any part of the body: hips, waist, thighs, back, upper arms and neck.

    Specification:

    Wavelength 635nm, 940nm
    Lamp Source Imported chips for assemble
    Lamp Type Low intensity diode
    Quantities of Lamps 1086pcs for the 5 pcs Light pads, 534pcs for the mask
    Each Lamp Energy 200MW
    Input Power ≤500W
    Working Mode Continuous and Pulse
    Treatment Pads 5pcs (1 large, 2 medium, 2 small), 1 mask
    Touch Screen 8 inch Touch Screen
    Cooling System Air Cooled
    Voltage 100-130V/200V-230V; 50Hz-60Hz
    Safety On Board Diagnostics
    Classification Electrical Class Ⅱ, Type B applied part
    Ingress Rating IPXO
    Environmental Requirement 10。C to 40。C. Non-condensing humidities below 75% RH
    CE CE with LVD and EMC
    Machine Packing Size 42cm*40cm*32cm
    Cart Package size 68*61cm*39cm
    G. W. Host:6KG; Cart and Pads:19kg

Product Description

Theory

The Maxlipo Light delivers both 635nm and 940nm light via high-powered, German-made, surface mount microchip lamps that are imbedded in a soft and flexible pad. This pad can easily be applied to any part of the body. Because of the Maxlipo Light’s proprietary reflective coating, the light that would normally bounce off the skin is reflected back, resulting in a much higher retention of light energy than with other similar devices.

No other system has this reflective coating. Maxlipo Light temperature is between 43-50 degree, actual skin contact temperature is 42-45 degree. The treatment is painless, no discomfort, and can be safely operated for clients and operators.

Unlike ultrasound, radio frequency, laser light and freezing, the system do not cause cellular damage. Quite the opposite, non-invasive Maxlipo Light has been shown to promote a natural response within cells based on the wavelength of the light energy used and the type of cell it reaches. Dual wavelengths(635nm and 940nm) have been used in a wide range of therapies that promote some form of healing response.

The design of the Maxlipo Light pads that allow for better light delivery and retention within the tissue has been clinically proven to provide a superior result with consistent treatment outcomes. No other pad-based device can make these claims.

Application

The Maxlipo Light is used as a non-invasive dermatological aesthetic treatment for the reduction of circumference of the hips, waist and thighs. 635nm and 940nm(invisible light) stimulate the lymph drainage and reduce the cellulite, and the 940nm light penetrates deeper into adipose tissue.

It is also for the temporary relief of minor muscle and joint pain, arthritis, muscle spasms, relieving stiffness, promoting the relaxation of muscle tissue and to temporarily increase local blood circulation.

Treatment:

The customer will lie on a treatment bed and the pads are placed over the area to be treated. The system will be turned on and the patient will feel a slight warming sensation, but no pain or discomfort. Most customers can read or use their phone/portable device, while some will even take a short nap.

The Results will vary from patient to patient, primarily due to the commitment by the patient to their goals. If a customer maintains a healthy lifestyle of a diet and exercise program that promotes weight control, their results can be long term.

The Maxlipo Light can be used on any part of the body: hips, waist, thighs, back, upper arms and neck.

Specification:

Wavelength 635nm, 940nm
Lamp Source Imported chips for assemble
Lamp Type Low intensity diode
Quantities of Lamps 1086pcs for the 5 pcs Light pads, 534pcs for the mask
Each Lamp Energy 200MW
Input Power ≤500W
Working Mode Continuous and Pulse
Treatment Pads 5pcs (1 large, 2 medium, 2 small), 1 mask
Touch Screen 8 inch Touch Screen
Cooling System Air Cooled
Voltage 100-130V/200V-230V; 50Hz-60Hz
Safety On Board Diagnostics
Classification Electrical Class Ⅱ, Type B applied part
Ingress Rating IPXO
Environmental Requirement 10。C to 40。C. Non-condensing humidities below 75% RH
CE CE with LVD and EMC
Machine Packing Size 42cm*40cm*32cm
Cart Package size 68*61cm*39cm
G. W. Host:6KG; Cart and Pads:19kg

Get A Quote

Please leave your email,we will contact you as soon as possible.
Product:5D Slimming Laser Pad Machine
Submit Now